How to Turn On a Wall Heater in House (With Steps)

A wall heater is a very common appliance that is used to heat offices and homes in winters. There are both natural gas heaters and electric wall heaters available in the market, and none of these is hard to operate. However, every unit requires a specific mechanism that varies from model to model to turn it on.

Below are some essential steps to turn on the wall-mounted – gas and electric – heater in your apartment.

wall heater

Step 1: Find the Heater’s Pilot Light

Most heaters have a pilot light right behind their vents, so it isn’t cumbersome to locate it. However, if you are turning on your heater for the first time, some units may require you to open the cover of the burner or remove it completely.

All the pilot lights are present behind the heater’s metal plate. Therefore, you will have to use a torch or any other source of light to find the pilot.

Step 2: Ignition Process

Electric Wall Heater

Once you have found the pilot, your next task is to locate the heater’s dial. Adjust the dial on “Pilot” and then press down to turn on the “Ignite” button for a new heater. This process will require some time as you will have to press the button repeatedly until you see a spark.

When your pilot light has started, keep pressing the button for some time. Do it for a minute or two and then finally release it.

Now turn on the dial and ignite the heater’s main burner. This step will lead to a sound indicating the lightning up of the burner. Now cover the heater’s opening.

Natural Gas Heater

Locate the knob on the heater and turn it to the “Pilot” button. Hold the button for a few seconds before releasing it.

Then press the same button again to light the pilot with a spark. If you have an old furnace, you will have to burn it manually using a matchstick. Once the heater’s light starts, keep pressing the button for a few seconds and then release it. Now, start the burner by turning the knob towards “ON.”

Read also: Best Non-Electric Space Heaters for Indoors

Step 3: Temperature Setting

Use the electric thermostat to set the desired temperature. Depending on the model, some heaters contain digital displays while others have proper dials for this task.

The thermostat keeps the room’s temperature a degree below or above than required. So, allow the temperature range to be between 70F° and 78F°.

Read also: What to do for a Thermostat Not Reaching Set Temperature

Preparing to Turn on Your Heater After Summer

A drop in the temperature outside indicates that it’s time to turn on the heater and make your place feel cozy and warm. But before you do that, you need to prepare the area and the wall heater to make sure everything works properly.

Clean the Vents

Before you turn on the heater, clean the vents for any dust. This tip will help prevent an additional buildup of grime in the air. Also, remove any obstructions that might be hindering your vent’s airflow and keep the vents open.

Replace Old Furnace Filters

You need to replace the heater’s filters if you have used them for a long time. You might already have new ones, but in case you don’t, you can simply take a measurement of the size and get them from the market. Old filters can harm the heating capabilities, so if you don’t want to suffer in the cold, take this tip very seriously.

Remove Any Nearby Objects

Remove them before you start the unit, especially if you have boxes, containers, or other items on or near your heater. This action is imperative to reduce the risk of fire.

Start the Thermostat

Test the heater for a few minutes before using it. Turn up your heater’s thermostat and check if the unit produces a click sound and starts circulating warm air. Let the heater run for a few minutes to see its performance, and if it doesn’t work correctly, consult a maintenance company as soon as you can.

Seal the Leaks

If you have cracks and leaks in your house through which the heat can escape, seal them with a suitable material. The existence of these holes or gaps will not let the heater perform well. Fix any broken windows as soon as you can. Plus, cover the spaces under your doors to keep the room warm in winter.

Read also: Aluminum Foil on Windows to Keep Indoor Heat During Winter

Final Thoughts

Now that you know how to turn on the heater, you are fully prepared for the cold season.

Only make sure to try the heater beforehand so that if there is a problem, you can consult a professional on time. For instance, if you smell something terrible and burning after starting the unit, turn it off instantly and open the windows to allow some ventilation.


Recommended Reading